Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

Start ScreenSteps Content
Start ScreenSteps Content


This Quickstart Guide will help you to connect to WPA2, Suffolk University’s secured wireless Network for faculty, staff and students. Students will need their Suffolk username and password to access SU_Student_WPA2. Faculty and staff must use their Suffolk desktop username and password to access SU_Staff_WPA2.

Include Page
University Computer Policy statement
University Computer Policy statement


For all other versions of MacOS X, please see the separate document Connecting to Suffolk University's wireless WPA2 networks on MacOS X



Follow these instructions carefully. Using this wireless network when your computer is not properly configured can expose your personal data. In particular, you could be vulnerable to connecting to a fake access point, exposing your personal data. This is called a “man-in-the-middle” attack. Your computer will be properly configured if you follow our instructions.

Step 1

From the Desktop menu bar, select the AirPort icon then select Open Network Preferences.

Step 2

Select the AirPort icon from the left panel and make sure the AirPort is turned on. If the status is Off, then click Turn AirPort On.

Step 3

Click Advanced. Use the “-” icon to delete any network entitled WPA2. Select the 802.1x tab and change the Domain to User.

Note: If you are unable to change the Domain, click Disable 802.1x Login.

Step 4

Click “+” to create a new profile and label the profile SU_Student_WPA2 or SU_Staff_WPA2.

Fill out the configuration as follows:

  • User Name: *Your Suffolk University username **
  • Password: *Your Suffolk University password **
  • Wireless Network: SU_Student_WPA2 or SU_Staff_WPA2
  • Authentication: PEAP (clear all other protocol options)
  • Click: OK
  • Faculty and Staff, use your Suffolk University domain username and password.
  • Students, use your Suffolk University email username (without the and password.

Step 5

At the Network window, for Network Name select SU_Student_WPA2 or SU_Staff_WPA2

Step 6

You will be prompted to enter a user name and password. Use your Suffolk University credentials for the user name and password. Check Remember this network and click OK.

Step 7

Your computer will now attempt to connect to the network. Once it connects for the first time, a window labeled Verify Certificate will pop-up. At this window click Show Certificate, check Always trust “, and click Continue.

Step 8

At the Network window, click Apply, and close the window.

Note: If your computer is unable to reconnect or restricted after it has been restarted, put in Sleep mode, or connected to another network, from the Desktop menu bar select the AirPort icon and toggle the AirPort off and then on.


You should now be connected to the SU_Student_WPA2 or SU_Staff_WPA2 wireless network.

If you are still unable to connect after following the above instructions, please contact the Help Desk at (617) 557-2000 or email

End ScreenSteps Content
End ScreenSteps Content