<!-- Start ScreenSteps Content -->
This advanced tutorial applies to those who have been provided the Logitech Quickcam Pro 9000 webcam for audio and video recording with CourseCast.
It shows you how to download and install the additional software required to fine tune your Logitech Quickcam Pro 9000 webcam. Fine tuning your webcam gives you the best quality video and audio recordings. Using the software you can also zoom, pan and tilt the camera lens.
If you are not using the Quickcam Pro 9000, you may have to follow instructions provided by your webcam manufacturer to fine tune its settings.
1. Go to the Logitech Quickcam 9000 website
Logitech Quickcam Pro 9000 website address - http://www.logitech.com/index.cfm/435/3056&hub=1&cl=us,en
2. Click Software Downloads link
On the website click the link under Software Downloads which says " Download installation software, drivers, updates and more...".
3. Select Operating System
On the downloads page, select the Choose OS drop down menu and pick the operating system of your computer
4. Select the File
Click on the Select File drop down menu and choose the 32-bit option. Choose 64-bit only if you are certain that you have a 64-bit Windows system
5. Click on the Download button
Scroll to the end of the page and look for the Download Software button
6. Save the File and launch
You will be prompted to save the file to a location on your computer. Save the Logitech software file on your computer and then double click on it to install the software.
7. Run the installer
Double click the downloaded file and follow the prompts on the screen.
1. On the Welcome page check the terms and conditions and click next
2. On the next page connect your webcam to your USB port on your computer. When it says connected, you can click next.
3. Next select the webcam software to be installed
4. Follow the prompts until you finish the installation process.
8. Installation Complete
Once the software installtion is completed, a Logitech tool bar similar to the one above will open up on your computer. This confirms you have successfuly installed the software. Using the Logitech tool bar, you can change the settings of your webcam and fine tune it to record crystal clear audio and video.
<!-- End ScreenSteps Content -->